Hydroponic Indoor Herb Garden Kit Smart Multi-Function Growing Led Lamp(AU Plug)
Bullet Points:
1. Intelligent Timing: You plug in the power, the button lights, then enter the timing state. Set the timing to 16 hours fill light + 8 hours rest. If you want to enter plant energy-saving mode, shortly press the button twice, entering the red-blue pure planting mode.
2. Reading Function: The reading light has 5 levels of brightness adjustment, which is helpful to protect the eyes if adjusted to the appropriate brightness. In this mode, the plant growth light function is turned off and the lighting angle can be adjusted to 360 degrees.
3. New Hydroponic Technology: The special planting medium avoids pest pollution and eliminates mosquito growth. At the same time, using space meteorite medium can improve the germination rate of plants, more suitable for plant growth.
4. Double Reminder Function: When the water level in the flower pot is less than the lowest scale, the red indicator light flashes and ulters two alarm sounds every 30 minutes. And the alarm prompt is removed after the water is replenished.
5. Special Intelligent Lighting: Through the study of the spectrum of sunlight, we use special LED lamp beads to replenish the light for the plants so that they can carry out photosynthesis, having sufficient sun and water supply while avoiding outdoor wind and rain. This will make the flowers more vivid, moving and make the flowering longer.
Button Operation:
1. Plug in the power.
2. Shortly press the button, enter the full-open (red, blue and white light full) automatic mode, the machine automatically counts the cycle work time and rest time (work 16 hours, rest 8 hours).
3. In the full-on mode, press the button again to enter the planting mode (red light blue). In this mode, the machine will start to cycle time and rest time (work 16 hours, rest 8 hours) from this time.
4. In the planting mode, press the button again to enter the lamp mode (white light). In this mode, long press the button, the brightness is adjusted in three steps. After selecting the appropriate brightness, release the button to lock the brightness.
5. Press the button again in the lamp mode to shut down.
6. A total of four short button main function can be cycled, in order: boot full light - plant lights - table lamp - shutdown.
Specifications:
1. Power: 8.5W
2. Input voltage: AC100-240V
3. Material: ABS
4. Color temperature: positive white: 5500k; red light: 660NM; blue light: 460NM
5. LED: SMD5730
6. Light effect: full light is more than 75LM; white light is more than 90LM; red light, blue light is more than 20LM
Bullet Points:
1. Intelligent Timing: You plug in the power, the button lights, then enter the timing state. Set the timing to 16 hours fill light + 8 hours rest. If you want to enter plant energy-saving mode, shortly press the button twice, entering the red-blue pure planting mode.
2. Reading Function: The reading light has 5 levels of brightness adjustment, which is helpful to protect the eyes if adjusted to the appropriate brightness. In this mode, the plant growth light function is turned off and the lighting angle can be adjusted to 360 degrees.
3. New Hydroponic Technology: The special planting medium avoids pest pollution and eliminates mosquito growth. At the same time, using space meteorite medium can improve the germination rate of plants, more suitable for plant growth.
4. Double Reminder Function: When the water level in the flower pot is less than the lowest scale, the red indicator light flashes and ulters two alarm sounds every 30 minutes. And the alarm prompt is removed after the water is replenished.
5. Special Intelligent Lighting: Through the study of the spectrum of sunlight, we use special LED lamp beads to replenish the light for the plants so that they can carry out photosynthesis, having sufficient sun and water supply while avoiding outdoor wind and rain. This will make the flowers more vivid, moving and make the flowering longer.
Button Operation:
1. Plug in the power.
2. Shortly press the button, enter the full-open (red, blue and white light full) automatic mode, the machine automatically counts the cycle work time and rest time (work 16 hours, rest 8 hours).
3. In the full-on mode, press the button again to enter the planting mode (red light blue). In this mode, the machine will start to cycle time and rest time (work 16 hours, rest 8 hours) from this time.
4. In the planting mode, press the button again to enter the lamp mode (white light). In this mode, long press the button, the brightness is adjusted in three steps. After selecting the appropriate brightness, release the button to lock the brightness.
5. Press the button again in the lamp mode to shut down.
6. A total of four short button main function can be cycled, in order: boot full light - plant lights - table lamp - shutdown.
Specifications:
1. Power: 8.5W
2. Input voltage: AC100-240V
3. Material: ABS
4. Color temperature: positive white: 5500k; red light: 660NM; blue light: 460NM
5. LED: SMD5730
6. Light effect: full light is more than 75LM; white light is more than 90LM; red light, blue light is more than 20LM
Bullet Points:
1. Intelligent Timing: You plug in the power, the button lights, then enter the timing state. Set the timing to 16 hours fill light + 8 hours rest. If you want to enter plant energy-saving mode, shortly press the button twice, entering the red-blue pure planting mode.
2. Reading Function: The reading light has 5 levels of brightness adjustment, which is helpful to protect the eyes if adjusted to the appropriate brightness. In this mode, the plant growth light function is turned off and the lighting angle can be adjusted to 360 degrees.
3. New Hydroponic Technology: The special planting medium avoids pest pollution and eliminates mosquito growth. At the same time, using space meteorite medium can improve the germination rate of plants, more suitable for plant growth.
4. Double Reminder Function: When the water level in the flower pot is less than the lowest scale, the red indicator light flashes and ulters two alarm sounds every 30 minutes. And the alarm prompt is removed after the water is replenished.
5. Special Intelligent Lighting: Through the study of the spectrum of sunlight, we use special LED lamp beads to replenish the light for the plants so that they can carry out photosynthesis, having sufficient sun and water supply while avoiding outdoor wind and rain. This will make the flowers more vivid, moving and make the flowering longer.
Button Operation:
1. Plug in the power.
2. Shortly press the button, enter the full-open (red, blue and white light full) automatic mode, the machine automatically counts the cycle work time and rest time (work 16 hours, rest 8 hours).
3. In the full-on mode, press the button again to enter the planting mode (red light blue). In this mode, the machine will start to cycle time and rest time (work 16 hours, rest 8 hours) from this time.
4. In the planting mode, press the button again to enter the lamp mode (white light). In this mode, long press the button, the brightness is adjusted in three steps. After selecting the appropriate brightness, release the button to lock the brightness.
5. Press the button again in the lamp mode to shut down.
6. A total of four short button main function can be cycled, in order: boot full light - plant lights - table lamp - shutdown.
Specifications:
1. Power: 8.5W
2. Input voltage: AC100-240V
3. Material: ABS
4. Color temperature: positive white: 5500k; red light: 660NM; blue light: 460NM
5. LED: SMD5730
6. Light effect: full light is more than 75LM; white light is more than 90LM; red light, blue light is more than 20LM
Bullet Points:
1. Intelligent Timing: You plug in the power, the button lights, then enter the timing state. Set the timing to 16 hours fill light + 8 hours rest. If you want to enter plant energy-saving mode, shortly press the button twice, entering the red-blue pure planting mode.
2. Reading Function: The reading light has 5 levels of brightness adjustment, which is helpful to protect the eyes if adjusted to the appropriate brightness. In this mode, the plant growth light function is turned off and the lighting angle can be adjusted to 360 degrees.
3. New Hydroponic Technology: The special planting medium avoids pest pollution and eliminates mosquito growth. At the same time, using space meteorite medium can improve the germination rate of plants, more suitable for plant growth.
4. Double Reminder Function: When the water level in the flower pot is less than the lowest scale, the red indicator light flashes and ulters two alarm sounds every 30 minutes. And the alarm prompt is removed after the water is replenished.
5. Special Intelligent Lighting: Through the study of the spectrum of sunlight, we use special LED lamp beads to replenish the light for the plants so that they can carry out photosynthesis, having sufficient sun and water supply while avoiding outdoor wind and rain. This will make the flowers more vivid, moving and make the flowering longer.
Button Operation:
1. Plug in the power.
2. Shortly press the button, enter the full-open (red, blue and white light full) automatic mode, the machine automatically counts the cycle work time and rest time (work 16 hours, rest 8 hours).
3. In the full-on mode, press the button again to enter the planting mode (red light blue). In this mode, the machine will start to cycle time and rest time (work 16 hours, rest 8 hours) from this time.
4. In the planting mode, press the button again to enter the lamp mode (white light). In this mode, long press the button, the brightness is adjusted in three steps. After selecting the appropriate brightness, release the button to lock the brightness.
5. Press the button again in the lamp mode to shut down.
6. A total of four short button main function can be cycled, in order: boot full light - plant lights - table lamp - shutdown.
Specifications:
1. Power: 8.5W
2. Input voltage: AC100-240V
3. Material: ABS
4. Color temperature: positive white: 5500k; red light: 660NM; blue light: 460NM
5. LED: SMD5730
6. Light effect: full light is more than 75LM; white light is more than 90LM; red light, blue light is more than 20LM
Related items
R 434.68
